Chicago Great Western & Rock Island preservation in northeastern Iowa


























History of the Chicago Great Western


The Stickney Years

     Alpheus Beede Stickney was a lawyer-turned-railroad magnate who had found work in management of several railroads before striking out on his own.

The Chicago Great Western, circa 1897.     In 1854, the Legislature of the Territory of Minnesota had chartered the Minnesota and Northwestern Railroad (M&NW) to be built between Lake Superior, Minneapolis and Dubuque, Iowa. However, it stayed dormant until purchased by Stickney and another investor in 1883. Immediately, the railroad began building, and by 1886 had constructed a line between St. Paul, Minnesota and Dubuque.

     By 1888, not only had the railroad changed its name to the Chicago, St. Paul and Kansas City Railroad (CStP&KC), it had finished a continuous line all the way across Illinois to Forest Park, Illinois, except for trackage rights with the Illinois Central across the Mississippi River. At Forest Park, the railroad made a connection with the ancestor of the Baltimore and Ohio Chicago Terminal for the last nine miles into Chicago's Grand Central Station. The new construction included Illinois' longest railway bore, the Winston Tunnel, south of Galena.

     Through merger and construction, the CStP&KC then added lines between Oelwein, Iowa, on the Chicago-to-St. Paul mainline, and Kansas City, Missouri, by 1891, and between Oelwein and Omaha, Nebraska by 1903. Thus, Oelwein became the hub of the railroad, and its main locomotive repair shops were soon located there. The mammoth facility was said to have inspired Walter Chrysler, who worked as the supervisor of the shops between 1904 and 1910.

     The Great Western also expanded its assortment of feeder branch lines in Iowa, Minnesota and Illinois, but plans to continue expanding the railroad north to Duluth, Minnesota, west to Sioux City, Iowa or Denver, Colorado, or south into Mexico, never came to fruition.



The Felton Years

     The railroad survived the Panic of 1893 to become the Chicago Great Western, and with Stickney at the helm soon developed a reputation for being an innovative and progressive competitor for traffic between the terminals it served. However, the Panic of 1907 forced it into bankruptcy, and the road was purchased by financial interests connected to J. P. Morgan. One of the first casualties of the buyout was Stickney, who was forced out and replaced by Samuel Morse Felton, Jr. in 1909. Felton realized that the railroad could not survive in the fiercely competitive markets it served without an ambitious and sustained effort to innovate and modernize. New rails, new locomotives including several Mallet locomotives (which set a precedent for the railroad acquiring huge locomotives with huge horsepower) pulled ever-longer freight trains over the system, and gasoline-powered motorcars to replace steam power on the lightly used passenger trains, were hallmarks of this rehabilitation.



The Joyce Years

     Felton retired in 1929 due to failing health. At the time he stepped down, investors friendly with Patrick H. Joyce had purchased a controlling interest in the Great Western from J. P. Morgan and had placed him in charge of the Great Western. The Wall Street Crash of 1929 threatened these financial interests, so Joyce and his friends, along with the Van Sweringen brothers, embarked on a stock-manipulation scheme to keep the price of CGW stock high. The inevitable happened in 1935, when the railroad declared bankruptcy once again. It was reorganized and re-emerged in 1941.[1]

Even as the CGW was being mismanaged, Joyce continued the modernization and innovation of his predecessors. The Great Western trimmed passenger service, which was never particularly profitable on the lightly-populated lines, abandoned branch lines and refurbished main lines, and continued acquisition of huge locomotives, this time 2-10-4 Texas-types, which pulled enormous trains, sometimes one-hundred cars long and longer. However, the most important innovation was the so-called "Piggyback Service", the forerunner of modern intermodal freight transport, which the Great Western introduced in 1936 by moving several hundred truck trailers on specially modified flat cars. The Great Western was also an early proponent of dieselization. It purchased its first diesel-electric locomotive, an 800-horsepower yard switcher from Westinghouse, in 1934, and was completely dieselized by 1950.[2]



The Deramus Years

     As it had happened in 1929, a group of businessmen friendly to William N. Deramus, Jr., president of the Kansas City Southern, had been purchasing up a controlling share of Great Western stock, and by 1949, this group appointed Deramus' son, William N. Deramus III, to head the railroad. He continued, even more aggressively than his predecessors, the modernization and cost-trimming that had become the hallmarks of the corporate culture of the CGW. Under Deramus, passenger service was almost entirely eliminated, and the railroad's offices, spread out in Chicago and throughout the system, were consolidated in Oelwein. Even longer trains than before, pulled by sets of five or more EMD F-units, became standard operating procedure, which hurt service but increased efficiency.

     In 1946, the first proposal to merge the Great Western with other railroads, this time with the Chicago and Eastern Illinois Railroad and the Missouri-Kansas-Texas Railroad.[3] Investors balked and the CGW stayed independent, but even as the Great Western survived and thrived during the 1950s, it was becoming increasingly clear that the American railroad climate was changing. Railroads were merging, changing traffic patterns and threatening the delicate economic balance in which railroads of similar size and stability to the CGW could exist. By the time Deramus stepped down from the CGW in 1957 to take the presidency at the Missouri-Kansas-Texas[4] the era of the railroad super-merger had begun.



The Merger Decade

     Upon his resignation, Deramus was replaced by Edward T. Reidy. As before, innovations continued to keep the company profitable. Second-generation diesel locomotives such as the EMD GP30 and EMD SD40, the largest and most powerful the CGW ever owned, found their way into the system, and the Oelwein shops stayed busy repairing and maintaining the now-aged F-units long after many other railroads had replaced theirs. Passenger service, reduced to two St. Paul to Omaha trains, was gone by 1962. Labor costs were trimmed, branch lines abandoned, as the Great Western tried to stay fiscally viable enough to be a suitable merger partner.

     Upon the failure of a merger offer from the Soo Line Railroad in 1963, the board of the Great Western grew increasingly anxious about its continued viability in a consolidating railroad market. Testifying before the Interstate Commerce Commission in Chicago, President Reidy claimed, "The simple fact is that there is just too much transportation available between the principal cities we serve. The Great Western cannot long survive as an independent carried under these conditions."[5]

     The CGW, therefore, was open to a merger bid with the Chicago and North Western Railway (CNW), first proposed in 1964. After a long period of regulatory wrangling, on July 1, 1968, the Chicago Great Western merged with Chicago and North Western.[6] The CNW maintained the facilities at Oelwein for several years, but ultimately abandoned the yard and shops. Within a decade, most of the CGW right-of-way had been abandoned by the CNW.



CGW Extant

A CGW caboose blt.1946 at the National Railroad Museum in Green Bay, Wisconsin.     Almost forty years after merger and piecemeal abandonment, some Chicago Great Western trackage and infrastructure remains in service. In Illinois, for example, the CGW mainline through St. Charles is now operated by the Union Pacific Railroad as an industrial lead for several shippers including a lumber yard; in Byron, a small section of trackage is used for car storage. Several depots also remain, some converted to better serve their new, non-railroad owners, and others restored to their former appearance. Long sections of former CGW rights-of-way have been preserved as rail trails, such as the Great Western Trail between Villa Park and Sycamore, Illinois, the Cannon Valley Trail between Red Wing and Cannon Falls, Minnesota, and the Sakatah Singing Hills State Trail between Faribault and Mankato, Minnesota. A handful of CGW locomotives remain operational, including all the former CGW SD40s, but all have long since been repainted and scattered nationwide. An EMD FP7-A, CGW 116-A, has been restored and repainted and is located at the former hub of the railroad at a museum in Oelwein. Sometimes an observant train watcher will notice an old hopper or tank car still painted in CGW colors, but they are now quite rare.

     At the Hub City Heritage Corporation Railroad Museum in Oelwein, we are working hard to preserve the history of the Chicago Great Western in Iowa.







Hub City Heritage Corporation Railway Museum

  26 2nd Avenue SW    Oelwein, Iowa     319-283-1939      info@cgwoelwein.org

Unless otherwise noted, images are Hub City Heritage Corporation Railway Museum
Copying, redistribution, or reuse of files, photos, text, or graphics from this website without written permission is prohibited.

Website design, maintenance and hosting by

2008-2015